JPRO Commercial Vehicle Diagnostics with Labor Time Guide
Click To Enlarge

JPRO Commercial Vehicle Diagnostics with Labor Time Guide

Price: $1,518.00
  • Item #: 212101-LTG
  • Manufacturer's Product Number: 212100-LTG
* Marked fields are required.
Qty: *

The JPRO Professional Diagnostic Toolbox includes the JPRO Commercial Vehicle Diagnostic Software (Annual Subscription after first 12 months) as well as Labor Time Guide, which offers an optional annual upgrade. 

JPRO FEATURES AND BENEFITS

JPRO Professional Diagnostic Basic Coverage includes the ability to read & clear codes on the following list. You can also view all live data and perform basic diagnostics.

  • Body and Chassis: Bluebird, Ford, Freightliner, GM, International, Kenworth, Mack, Peterbilt, Sprinter, Sterling, Thomas Built, Volvo, and Western Star
  • Engines: CAT, Cummins, Detroit, Ford, GM, International, Mack, Mercedes, PACCAR MX, Sprinter, Volvo
  • ABS: Bendix, Ford, GM, Haldex, Sprinter, Wabash, WABCO
  • Transmission: Allison, Detroit, Eaton, Ford, GM, Mack, Sprinter, Volvo, ZF

The software will now perform the following bi-directional commands:

  • Cummins - Bi-directional support for the following:
    • Cylinder cut-out for EPA 2002 to Current (ISB, ISC, ISL, ISM, & ISX)
    • DPF Stationary Regen for EPA 2007 to Current (ISB, ISC, ISL, ISM, ISX)
    • Trip Reset for EPA 2007 to Current (All ECUs)
    • Aftertreatment reset for EPA 2007 to Current (All ECUs)
    • Fuel Injector Reset for EPA 2013 to Current (All ECUs)
    • Fuel Leakage Test for EPA10 to Current
    • Fuel Injector Calibration EPA 2007 & EPA 2010 (All ECUs)
    • VGT Actuator Installation & Calibration EPA 2010 to Current
    • VGT Hysteris Test for EPA 2010 to Current
    • DEF Doser Pump Override for EPA 2010 to Current
    • Change road speed, cruise speed, & idle shut down timer for EPA 2007 to Current
    • DEF System Leak Test (EPA 10 ISB/ISC/ISL/ISX & EPA 13 ISB/ISL/ISX)
  • Detroit Diesel - Bi-directional support for the following:
    • Cylinder cut-out for 2000 to 2014
    • DPF Service Regen for EPA 2007 to Current
    • SCR System Output Component Tests for EPA 2010 to 2013
    • SCR ADS Self Check for EPA2013 to Current
    • DPF Ash Accumulator Reset for EPA 2010 to Current
    • Idle Shut Down Timer EPA 2010 to Current
    • Cruise Speed Limit Changes for EPA 2010 to Current
    • Road Speed Limit Changes for EPA 2010 to Current
    • DEF Quantity Test for EPA 2010 to Current
    • Parked SCR Efficiency Test for EPA 2010 & 2013
    • Performed Check Low Temp for EPA 2010 & 2013
    • JPRO does NOT have bi-direcitional commands for EPA2017 & Newer
  • Mack & Volvo - Bi-directional support for EPA 2007 to Current:
    • Cylinder cut-out
    • DPF Stationary Regeneration
    • DPF System Reset
    • Learned data reset
    • Setting parameters (Cruise min/max, speed limits, idle shut-down times, and enable/disable cruise)
    • Trip reports & life of vehicle reports (Only Volvo 2012 & Newer and Mack 20007 & Newer)
    • Enable/Disable Driver Cruise Control
    • EGR Function Test (EPA 2013 to Current)
    • VGT Function Test (EPA 2013 to Current)
    • VGT Monitor Test (EPA 2013 to Current)
    • DEF Pressure System Test (EPA 2013 to Current)
  • International - Bi-directional support for EPA 2007 to Current:
    • Cylinder Cut Out Test (All MaxxForce & N-Series Engines)
    • DPF Stationary Regeneration
    • Aftertreatment Reset for EPA 2007 & 2010 MaxxForce 11/13
    • DOC/DPF Replacement for EPA 2013 N-Series Engines
    • KOER Standard Test for all MaxxForce and N9/N10 Engines
    • SCR Faults Reset for EPA 2013 N-Series Engines
    • Fuel Shutoff Valve for EPA 2010 MaxxForce 11/13
    • Fuel Doser Actuator for EPA 2010 MaxxForce 11/13
    • ETV Position Actuator for EPA 2010 MaxxForce 11/13 and N13 SCR Engines
    • EGR Position Actuator for EPA 2010 MaxxForce 11/13 and N13 SCR Engines
    • Air Management Test for all MaxxForce, N9, and N13 SCR Engines
    • DEF Doser Pump Override Test for N9, N10, & N13 SCR Engines
    • KOER Injector Tests for all MaxxForce & N9/N10 Engines
    • Fuel Pressure Adaption Reset (EPA 2007 to Current MaxxForce 7)
    • Idle Shutdown Time (EPA 2007 & 2010 MaxxForce 7, DT, 9, 10, 11, 13, & 15)
    • Road & Cruise Speed (EPA 2007 & 2010 MaxxForce 7, DT, 9, 10, 11, 13, & 15)
  • PACCAR MX Engines (Does not cover GHG17 Engines)
    • Automated Cylinder Performance Test
    • DPF Service Regen
    • Install a New/Cleaned DPF Filter command
    • DEF Pressure System Test (EPA 2013 & Newer)
  • Isuzu - Supports 2008-2017 Isuzu trucks with either the 5.2L (4HK1) or 3.0L (4JJ1) engine in both North America
    • Cylinder Cut Out
    • DPF Service Regen
  • Ford - Supports 2004 to 2015 Ford models F-Series, E-Series, Transit Connect, and Transit Vehicles
    • Gives users the ability to read and clear faults, read freeze frames, read sensor data, and display emission test results
    • Enables users to run diagnostic testson components such as Key On Engine Off (KOEO) On Demand Self Test
    • Ford 6.4L - Cylinder Cut-out Test for EPA 2008-2017
    • Ford 6.4L - Parked DPF Regen for EPA 2008-2017
    • Ford 6.7L – Cylinder Cut-out Tests for EPA 2011-2017
    • Ford 6.7L - Parked DPF Regen for EPA 2008-2017
  • GM - Supports 2002 to 2015 GM models GMC & Chevy 1500, 2500, 3500, GMC Express & Chevy Savana, all GM Medium Duty Vehicles
    • Gives users the ability to read and clear faults, read freeze frames, read sensor data, and display emission test results
    • Supports cylinder cut-outs on all diesel & gaslonies engines on years 2002 to 2017 (Except for CAT engines)
    • Tests for 2010 to 2012 Express/Savana with 6.0L gas engines
    • DPF Service Regen for 2010 to 2017 with 6.6L, 2017 GMC Savana, and Chevy Express with 2.8L
  • Sprinter - Supports 2007 to current year
    • Sprinter module gives users the ability to read and clear faults, rear sensor data, and display emission test results
    • Supports EPA 2007 & newer engine tests: Cylinder cut-out, compression test, DPF regen, injector quantity adjustment, mass air flow sensor initialization, and initialize rail pressure
    • Supports instrument clustomer (2007-2015) tests: Oil change reset, display dimmer test routine, gauge sweep test, LCD display test routine, and speaker test routine
    • Supports tire pressure monitor - Tire pressure sensor test
  • WABCO ABS
    • ABS Lamp Test
    • Wheel Speed Chart Test
    • Wheel Speed Window Test
  • Bendix ABS
    • ABS Lamp Test
    • Wheel Speed Chart Test
    • Wheel Speed Window Test

 

Please note: This unit will STOP working after 12 months. You are required to purchase the annual renewal fee (Part # 40175) to continue using this machine after 12 months.

 

VIDEO DEMONSTRATION 

LABOR TIME GUIDE FEATURES AND BENEFITS

Labor Time Guide software from Diesel Laptops allows you to look up labor times for all of your class 8 commercial trucks, engines, and transmissions. There are tens of thousands of labor times, and our unique software will give you a low, average, and high time for each operation. Coverage includes everything from engine to suspension to brakes and beyond. The software will also allow you to create professional looking estimates that include your shop information and company logo. Estimates can be emailed directly to your customers, saved to PDF, or printed.

Current Manufacturers Covered

  • CAT Engines
  • Cummins Engines
  • Detroit Engines
  • International Engines
  • MBE4000 Engines
  • MBE900 Engines
  • Mack Engines
  • PACCAR Engines
  • Volvo Engines
  • Freightliner Class 8 Trucks
  • International Class 8 Trucks
  • Kenworth Class 8 Trucks
  • Mack Class 8 Trucks
  • Peterbilt Class 8 Trucks
  • Volvo Class 8 Trucks
  • Western Star Class 8 Trucks

Key Features

  • Simple to use interface
  • Includes "add on" labor time for common operations
  • Covers up to 2017 model year trucks
  • Includes estimating software
  • Email, Print, or save to PDF estimates
  • Retrieve previous estimates

The software has no required annual fees, and you will receive lifetime updates for the version you purchase. When new versions are published (Every 12-18 months), there is a nominal fee to ugprade to the new version if you wish to do so.

 

Reviews (0) Write a Review
No Reviews. Write a Review