• AutoEnginuity with Ford, GM, Dodge, & Chevrolet Enhanced

    AutoEnginuity with Ford, GM, Dodge, & Chevrolet Enhanced

    $899.95

    SKU SP05

    This package from AutoEnginuity will allow you to view diagnostic codes on EVERY engine, plus it allows you to have full bi-directional control on all the major domestics -- Ford, GM, Dodge, and Chevrolet. This package gives you the ability to perform tests such as:

    About the AutoEnginuity with Ford, GM, Dodge, & Chevrolet Enhanced

    Ford Family - Supports over 7,900 sensors from 122 systems. This includes support for non-US models such as Ka, Mondo, Galaxy, and Fairline.

    See Coverage

    • PATS Timed Key Programming ('96 - '08)
    • KOEO
    • KOER
    • Power Balance (CAN-based models)
    • EVAP Bay Test
    • Service Bleed (Non-CAN support not available with ProLine currently)
    • Buzz Injector
    • Cylinder Contribution Test
    • Switch Test
    • Glow Plug Test
    • System Self-Test
    • Low - and High Speed Fan
    • All Outputs On/Off
    • Injector Coding (1.8L and 2.0L)
    • KAM Reset
    • Misfire Monitor Neutral Profile Correction
    • Tire Size Programming up to 40" ('99-'03 7.3L, and '04-'07 6.0L trucks)
    • IVD Initialization
    • Steering Angle / Yaw Rate / Acceleration Sensor Reset ('03 Explorer and Lincoln LS)
    • Passenger Seat ReZero and Passenger Weight Reset
    • Power Seat Calibration Test
    • Audio Network Communication Test
    • Vehicle In-Motion IO Test
    • Front Wiper Self-Test
    • Rear Wiper Self-Test
    • Diesel Particulate Filter Reset, Clear EGR Adaptive Tables, and Clear Fuel Injector Adaptive Tables

    GM Family - Includes support for Buick, Cadillac, Chevrolet, GMC, Hummer, Oldsmobile, Pontiac, and Workhorse. Over 6,000 sensors from over 68 systems is supported. There are over 2,000 bi-directional command and system level tests that can be performed!

    • ABS Automated Bleed Routine (ProLine Connector)
    • Crank Variation Learn
    • Injector Flow Rate Programming (CAN-based Diesels)
    • Key Fob Programming
    • SDM Setup and Part Number Programming
    • Idle Learn
    • TDC Learn
    • Tire Pressure Sensor ID Programming (via CAN-based Remote Control Door Lock Receiver)

    Chrysler/Dodge/Jeep - Coverage includes diesel Cummins engines, Dodge Sprinters Vans, and much more!

    • EGR System Test
    • EVAP System Monitor Service Test
    • Erase All DTC Fault Codes
    • Generate Full Field Test
    • Gov & 3-4 Shift Valve Test - JTEC Only
    • Leak Detect Pump Test
    • Purge Vapors Test
    • Reset All Adaptive Memory Fuel Cells
    • Reset All Non-Volatile Memory
    • Reset CAM/Crank Misalignment
    • Reset CAM, Crank, and Sync Status Record
    • Reset Duty Cycle Monitor
    • Reset Engine Running Time Record
    • Reset Fuel Shut-off Record
    • Reset Intake Airflow Control Stepper Motor Position
    • Reset Trip Information
    • Set Sync Signal - JTEC Only
    • Set Minimum Throttle Position to Maximum
    • Torque Converter Clutch Test - JTEC Only

    Watch this tool in action!

    Return Policy

    Easy Returns

    When you buy from Diesel Laptops, we want to make sure you're happy with your purchase. You may return this product within 30 days of delivery, with a small 15% restocking fee. It's part of how we keep things fair for everyone.

    For more details, please visit our Return Policy page below.

    View Return Policy

    Contact Us

    Questions?

    If you have any questions about this or any other product, please don't hesitate to contact one of our Diesel Laptops experts at (888) 983-1975 or by clicking below!

    Contact Us

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)