Inboard

Volvo Penta -
Diagnostic Coverage has been extended and the Guided components Check feature has been added.

Outboard

Honda -
The coverage has been extended with the introduction of the engines BF175, BF200, and BF225 VTEC.

Mercury -
The complete diagnosis has been included for 175 EFI 4 stroke, 200 EFI 4 stroke, 225 EFI 4 stroke, 250 EFI 4 stroke, 80 EFI Jet 4 stroke, Pro XS 115 EFI 4 stroke, Pro XS 150 EFI 4 Stroke, Pro XS 175 EFI 4 stroke, Pro XS 200 EFI 4 stroke, Pro XS 225 EFI 4 stroke, Pro XS 250 EFI 4 stroke, Pro XS 300 EFI 4 stroke, SeaPro 200 EFI 4 Stroke, SeaPro 225 EFI 4 stroke, SeaPro 250 EFI 4 stroke, SeaPro 300 AMS EFI 4 stroke, and SeaPro 300 CMS EFI 4 stroke.

Suzuki -
The complete diagnosis was included for DF9.9B, DF15A, DF20A, DF25A ,DF30A, DF100A, DF150ZG, DF150TG, DF175TG, DF175ZG, and DF200AP.

PWC

Yamaha -
The injection diagnosis has been included for F25, WaveRunner EX, WaveRunner EX Deluxe, WaveRunner EX Sport, WaveRunner EXR, WaveRunner EXR Deluxe, WaveRunner GP1800, WaveRunner GP1800R, WaveRunner VX, WaveRunner VX Cruiser, WaveRunner VX Cruiser HO, WaveRunner VX Deluxe, and WaveRunner VXR.

New Software Features

Dynamic Dashboards for Mariner, Mercruiser, Mercury, Mercury Racing
They have been implemented in the adjustment procedures Trim position setting, and Tilt position setting, with real time graphical display of the parameters involved.

Technical Data and Maintenance

A new sub-menu has been implemented in the vehicle selection, with sheets providing the technical data of the selected engine and the related programmed maintenance plan. Texa increased Technical Documentation for Mariner, Mercruiser, Mercury, Mercury Racing, FPT, Honda, Suzuki, Tohatsu, and Yamaha.

New Cables

AM43 - Complete cable for the diagnosis of Mercruiser, Volvo Penta, Crusader, Ilmor, Indmar, PCM, Kodiak, Marine Power, Panther Airboats, and Seven Marine equipped with the 6-Pin OBD-M socket.

Mercruiser- this socket can be installed on the engines equipped with a Visteon PCM 09 control unit.

Volvo Penta- this socket can be installed don the gas engines equipped with a Volvo Penta EGC System control unit and produced starting from May 2007.

Crusader, PCM, and Marine Power- this socket is installed on the engines produced starting from 2007.

AM44 - Complete cable for the diagnosis of Mercury, Mercury Diesel, Mercury Racing, Mercruiser, Mariner, Cummins Marine, Cummins Mercruiser Diesel equipped with a 10-Pin socket.

Mercury, Mercury Racing, Mercruiser, Mariner- you can carry out the diagnosis on the injection system, the diagnosis on the various secondary systems and the lever configuration on the engines equipped with a CAN network and protocol.

Mercury Diesel- this socket can be installed on the engines produced starting from 2011, you can carry out the diagnosis on the various secondary systems.

Cummins Marine- this socket can be installed on the engines produced starting form 2010, you can carry out the diagnosis on the various secondary systems.

You can also run the function Global Scan to scan the CAN of the latest generation boats.

You can view these cables on www.marinediagnostictools.com

TechData.jpg