To accessing the Graph page on DDDL:
1). Connect Detroit Engine (Series 60) using DDDL Software (v6.50).
2). Choose Normal Instrumentation or Diagnostic Instrumentation from the Diagnostics menu.
3). Clicking on the Graph tab in the Instrumentation window will displays the Graph page. The Graph page allows you to display traces showing the variation of selected measurements over time. The traces are scaled automatically and color coded so that they can be identified from the Description at the bottom of the Graph page. When the trace reaches the left-hand edge of the Graph window (after two minutes) the trace scrolls, so that the window always shows the result of measurements made in the last two minutes.
4). To choose (or change) which measurements to trace:
→Press Modify to display the Modify graph page dialog box. The Selected list shows the measurements chosen for tracing in the Graph page.
To add or remove another measurement:
→Select the measurement by clicking on it in the Available list.
→Press Add >> or << Remove.
To confirm the new list of measurements to be traced in the Graph page:
→Press OK to close the dialog box.
As soon as you have closed the Modify graph page dialog box, the chosen measurements are listed in the box at the bottom of the Graph page, with the current value, and the value is traced in the Graph window.
To save the current graph page settings in a file:
→Press Save to display the Save Graph Page Settings As dialog box:
→Select the folder in which to save the file, and enter a File name for the file.
→Press Save to save the file and close the dialog box.
To load a set of previously saved Graph page settings:
→Press Load to display a standard windows open dialog box.
→Use the dialog box to locate the folder holding the required file, and click on the File name to select it.
→Press Open to close the dialog box and load the settings.