• TEXA IDC5 Truck v50.0.0 Update

    TEXA’s groundbreaking software application, IDC5 has just been updated to version 50.0.0. Thanks to major improvements in code, the new system is faster than ever, guarantees virtually instant communication with a vehicle’s control units and has greater coverage for Allison, Caterpillar, Chevrolet, Dodge, Ford, Freightliner, Hino, International, Isuzu, Kenworth, Mack, Mercedes-Benz, New FLyer, Peterbilt, and UD TRUCKS.


    For a full list of manufacturers covered by TEXA, please see our website listing.

    TEXA Truck Kit

    See Full Coverage


    New Software Features

    TEXA TRUCK 50 introduces a new interactive function for some systems that allows technicians to check wiring diagrams directly from the parameter dashboard.

    Technical Support and Advanced Assistance

    TEXA's Technical Support can now be accessed by clicking an icon in the upper menu bar.

     

    TEXA IDC5 50.0.0 Update Chart

    TRUCK

    MANUFACTURER
    UPDATE
    ALLISON TRANSIMISSION
    The adjustment "Recalibration procedure (manual procedure)" has been developed for the "Allison Generation 3 - 4" automatic transmission system.
    CATERPILLAR
    The activation "Injector solenoid test" has been updated for the "Caterpillar" diesel injection system.
    CHEVROLET
    The new model "Kodiak 7.8 Diesel" has been developed with the following systems:
    • ABS
    • Automatic transmission
    • Diesel Injection
    The new model "Kodiak 8.1 Gasoline" has been developed with the following systems:
    • ABS
    • Petrol Injection
    FREIGHTLINER
    The Diesel Injection system "Detroit - MBE Engine management system EPA 07 /10/13" has been updated.

    The activation "Low temperature after-treatment test" has been developed for the Diesel Injection system "Detroit - MBE Engine management system EPA 07 /10/13".

    The adjustment "Gear down protection - enable/disable" has been developed for the Diesel Injection system "Cummins EPA 07 /10/13".

    HINO
    The Diesel lnJection system "Denso Common Rail EPA 07 /10/13 CAN Line" has been updated in the following models:
    • Class 4 (Series 300)
    • Class 5 (Series 300)
    • Class 6 (Series 600)
    • Class 7 (Series 600)
    INTERNATIONAL
    The following have been updated for the Diesel Injection system "International Navistar-MaxxForce":
    • the adjustment "Aftertreatment filter reset"
    • the activation "KOER - Multi cylinder cut-out"
    The "International - Stoneridge Body controller Gateway" system has been updated in the following models:
    • Caterpillar
    • CF 600
    • Cummins
    • Detroit Diesel - Mercedes Benz
    • International
    • MWM
    The "Wabco D / E" ABS error list has been updated.
    KENWORTH
    The Diesel Injection system "Delphi PCI System EPA 10/13" has been updated.

    The Diesel Injection system "Caterpillar (--/00>] Caterpillar Protocol" has been updated The Diesel Injection system "Cummins EPA 98 J1708" has been updated.

    The EBS system 'Wabco EBS 3" has been updated.

    The ADAS "AEBS/ACC distance control" has been updated in the following models:
    • K270
    • K370
    The SCR/DPF aftertreatment system "Bosch EAS 4" has been updated for the Paccar model.
    MACK
    The activation "Selective catalytic reduction NOx conversion monitoring" has been updated.
    The adjustment "Injector coding" has been updated for the following models:
    • Cummins
    • Mack IV+ Generation with OBD 1116 PIN connector
    • Mack IV Generation with DEUTSCH 9 PIN connector
    The following systems have been updated:
    • "Engine control unit"
    • "I-Shift"
    • "Selector lever control unit"
    • 'Vehicle-engine ECU"
    PETERBILT
    The adjustment "Engine brake speed activation" has been developed for the system "Cummins EPA 07 /10/13". The EBS system "Wabco EBS 3" has been updated.

    The ADAS "AEBS/ACC distance control" has been updated.

    The SCR/DPF aftertreatment system "Bosch EAS 4" has been updated for the Paccar model.

    UD TRUCKS (NISSAN DIESEL)
    The Diesel Injection system "EMS Engine Management System" has been updated in the following models:
    • Heavy Duty MY 2018;
    • Medium Duty MY 2018.
    The auxiliary heating system "CCM Climate control module and auxiliary heating module" has been updated in the following models:
    • Heavy Duty MY 2018
    • Medium Duty MY 2018
    The following systems have been updated:
    • "Volvo EDC UIS/PDE"
    • "I-Shift"
    • "Selector lever control unit"
    • "Vehicle-engine ECU"

    BUS & COACH

    MANUFACTURER
    UPDATE
    ALLISON TRANSIMISSION
    The adjustment "Recalibration procedure (manual procedure)" has been developed for the "Allison Generation 3 - 4" automatic transmission system.
    NEW FLYER
    New models have been developed:
    • LFA / LFR Series
    • Midi Series
    • Xcelsior
    With the following systems:
    • Automatic transmission
    • CNG injection
    • Diesel Injection
    • Trip Data Recorder

    LIGHT COMMERCIAL VEHICLES

    MANUFACTURER
    UPDATE
    DODGE
    The Diesel Injection system "Cummins (--/13>]" has been updated for the model RAM Fourth Generation (09>).
    FORD
    The following systems have been updated for the model F Series Super Duty:
    • ABS
    • "(AUD) Audio control unit 7 "
    • "(AUD) Audio control unit 2"
    • "(AUD) Audio control unit 3"
    • Automatic transmission
    • "(BCM) Body Control Module 7 "
    • "(BCM) Body Control Module 2"
    • "(DSM) Driver Seat Module"
    • "(FCIM) Front Control Interface Module"
    • Diesel Injection
    • "(PAM) Parking Assist Module"
    • "(RBM) Running board control module"
    • "(SCCM) Steering column module"
    • "(SCMH) Passenger side seat control unit"
    • "(SECM) Steering Effort Control Module"
    • Instrumentation
    • "(TCCM) Transfer Case Control Module"
    • "(TRM) Trailer Module"
    The ABS error reading has been improved for the model F Series Super Duty.
    ISUZU
    The following systems have been updated for the models F Series 5.2 Diesel 4HK1 [2020] and N Series 5.2 Diesel 4HK1 [2020]
    • "Isuzu TCM"
    • "Isuzu Engine control unit"
    The following systems have been updated for the models F Series 5.2 Diesel 4HK1 [2021] and N Series 5.2 Diesel 4HK1 [2021]
    • "Isuzu TCM"
    • "Isuzu Engine control unit"
    The ADAS "Stereoscopic Camera" has been developed in the following models:
    • N-Series 4HK1
    • N-Series 4JJ1
    • N-Series RZ4E
    • F-Series 4HK1
    • F-Series 4JJ1
    MERCEDES-BENZ
    The following systems have been updated for the model Sprinter (907 /910):
    • "ABA Active Brake Assist"
    • "(EZS) Electronic ignition switch"
    • "MFC Multi-function camera"
    • "Driver's door"
    • "Front passenger side door"
    • "SAM Signal Acquisition Module"
    • "(RFK) Reversing video camera"

    WIRING DIAGRAMS

    MANUFACTURER
    UPDATE
    CATERPILLAR
    The following diagram has been developed for the vehicles with a Caterpillar engine: Diesel Injection.
    DODGE
    The following diagrams have been developed for the model Sprinter 2500 - 3500:
    • ABS
    • Automatic transmission
    ISUZU
    The following diagrams have been developed for the models N Series 4JJ1 and N Series 4HK1:
    • ABS
    • Advanced Driver Assistance Systems (ACC - LOW)
    • Automatic transmission
    The following diagrams have been developed for the model N Series RZ4E 1:
    • Advanced Driver Assistance Systems (ACC - LOW)
    • Automatic transmission
    • Diesel Injection
    The following diagram has been developed for the model D-Max RZ4E:
    • Diesel Injection
    The following diagrams have been developed for the model F Series:
    • Advanced Driver Assistance Systems (ACC - LDW)
    • Automatic transmission
    Previous article The Diesel Technician Shortage Explained

    Diesel Marketing

    Leave a comment

    Comments must be approved before appearing

    * Required fields


    How much is:
    Answer:*