×

TEXA OHW 20.9.1 Update

About once a month the TEXA OHW software on the Diesel Laptops Off-Highway Kit adds a handful of helpful patches. The goal of these patches is to continuously add functionality to the makes and models of construction and farming equipment that we hear customers ask about most frequently.

This month, with the release of TEXA OHW 20.9.1 we saw a few important additions:  

  • Sennebogen - Crane, Telehandler and Excavator  models has been added 
  • Case CE - The Skeed Steer SR & SV with SHIBAURA engine selction has been added. 
  • Deutz - The Bosch MD1 diesel injection system for Stage V models has been added; 
     The Bosch EMR3 EDC 16 and Bosch EMR4 EDC 17 diesel injection systems have been updated. 

See below for a full list of additions included in this update. If you are having issues updating your Diesel Laptop with TEXA off-highway software contact our support team!


For a full list of manufacturers covered by TEXA, please see our website listing.

TEXA Truck Kit

 

See Full Coverage

 


OHW 20.9.1

MANUFACTURER
UPDATE
ARBOS
The brand has been added.
BOBCAT
The diagnostic systems have been added
CASE CE
The Skeed Steer SR & SV with SHIBAURA engine selction has been added.
CATERPILLAR ENGINE
The new Engine data log procedure has been added; The Product status report procedure has been updated.
CUMMINS ENGINE
New live data and the new injector coding procedure for QSB Engines have been added.
DEUTZ ENGINE
The Bosch MD1 diesel injection system for Stage V models has been added; The Bosch EMR3 EDC 16 and Bosch EMR4 EDC 17 diesel injection systems have been updated.
HITACHI
The Excavator Serie 5 with YANMAR engine has been added.
HYUNDAI CE
The Excavator with SCANIA engine has been added.
JCB
The Delphi DCM 3.3+ and ECM Electronic Control Module diesel injection systems have been updated.
JOHN DEERE
The ECU Engine control unit diesel injection system has been updated.
JOHN DEERE CE
The HCU Hydraulic Control Unit and ECU Engine control unit systems have been updated.
KUBOTA ENGINE
The ECU Engine control unit diesel injection system has been updated.
LANDINI
The Rex Series with DEUTZ engine has been added.
LIEBHERR
Liebherr LIDEC 1: - configuration reading has been improved; - New settings as Engine idle speed, Engine minimum speed and Engine maximum speed have been added.
LS MTRON
The MT5 Series has been added.
MASSEY FERGUSON
47xx Series: the Automatic gearbox system has been updated; 26xxH Series has been added.
MOW
The ZF 8HP transmission system, Bosch EDC 17 CV 88 diesel injection system and Bosch ABS/ESP 9 brake system have been updated.
MTU ENGINE
The ACM Exhaust gas after treatment system has been updated.
PERKINS ENGINE
The new Engine data log procedure has been added; The Product status report procedure has been updated.
SENNEBOGEN
rane, Telehandler and Excavator models has been added

Wiring Diagrams

MANUFACTURER
UPDATE
RENAULT AGRICULTURE
Ares 500 Series:
  • Diesel injection
  • Automatic transmission
  • Suspended axle
  • Rear hydraulic lift
Ares 800 Series:
  • Diesel injection
  • Automatic transmission
  • Suspended axle
  • Rear hydraulic lift
Celtis 400 Series:
  • Diesel injection
  • Rear hydraulic lift
YANMAR
DOC and DPF replacement.
JOHN DEERE
Ash reset for level 21, 23,33 and 34 ECMs.

Dashboards

MANUFACTURER
UPDATE
FENDT
Bosch Rexroth Hydraulic control valves control module.
HITACHI
MC command control unit and ECM Engine Control Module.

Technical Bulletins

MANUFACTURER
UPDATE
WACKER NEUSON
DPF regeneration for the following models:
  • Dumper with PERKINS engine
  • Skid steer with PERKINS Engine
  • Excavator with PERKINS Engine
MASSEY FERGUSON
Calibration of the linkage controls, Rear linkage calibration, Forward speed calibration and Adjusting linkage position sensor for the following models:
  • 47xx Series
  • 57xx Series
  • 67xx Series
DEUTZ Engine
Injector calibration (ZFL) technical data sheet.
Previous article What to Know Before Buying a Diesel Laptops Off-Highway Diagnostic Kit [FAQs]
Next article How to Force a Regen on a Komatsu Loader

Angaeli Lall-Butcher

Angaeli covers all things Off-Highway as a part of the marketing team at Diesel Laptops, from construction and agriculture machinery to heavy equipment diagnostics.

My role has brought me to The National Tractor Pulling Championships in Bowling Green OH, had me trekking through farms in Gilbert, SC and even sent me to a construction theme park in NJ. I spread the word about new ways that Diesel Laptops serves the Off-Highway community, and work with diesel techs to help them discover heavy equipment repair options.

Leave a comment

Comments must be approved before appearing

* Required fields


How much is:
Answer:*